The Cool-N-Save® Commercial AC pre-cooler is an amazing new system that has taken the known benefit of evaporative AC pre-cooling (more efficient cooling) and combined it with
“state of the art” technology to create the first economical & effective AC Pre-Cooling system
that DOES NOT SCALE or interfere with airflow.
It uses a low flow / high pressure mist that is activated only when the AC unit turns on. When
the ultra-fine mist is released into the air, it evaporates almost instantly. This flash evaporation literally sucks heat out of the air, as the water absorbs the energy it needs to evaporate.
The result of this immediate evaporation is a drop in ambient temperature of as much as 30 degrees Fahrenheit surrounding the condenser. This allows the coils to transfer heat much more effectively which in return lowers the amperage draw, output temperature, cycle time & head pressure, all adding up to a 30% or more reduction in energy use. Plus, because it allows the unit to run more efficiently it can greatly extend the life of the condenser too.
We also included a summary of actual savings & actual electric bills for one of these sites.
Below is a link to the results of two tests done by an independent engineering firm at different sites in different states. You will notice an average of 22.8% reduction in amp draw between
the 2 tests. This along with a significant drop in head pressure & output temperature brings
us to approximately a 32% reduction in energy use. These are typical results but may vary depending on the size & type of AC unit plus a combination of climate & use.
We also included a summary of actual savings & actual electric bills for one of these sites.
